Popular Splines
DD
Splined
Smooth
94-Up Mustang
         
Universal joints work smoothly up to 35 degrees.
Double U-Joints will work smoothly up to 70 degrees.
                     
U-Joint
            
               

Single u-joints available in the following sizes:
Smooth bore both ends
Smooth bore x spline or DD
Spline or DD x spline or DD
Polished stainless steel u-joints

Double u-joints available in the following sizes:
Smooth bore both ends
Smooth bore x spline or DD
Spline or DD x spline or DD
Polished stainless steel u-joints

             
                                   
                                           
   
Double U-Joint
     

Single U-Joint

                       
                                                           
 

Used to stop pulsations from the power steering pump.

U-joint can be combined with vibration reducer in a vibration joint that will work smoothly up to 35 degrees.

Rag joints are available and must be mounted straight!
   
 
 
Female/Female Vibration Reducer
     
Female/Male Vibration Reducer
           
                 
U-Joint Vibration Reducer
Pre-Welded Coupler

Coupler and adaptor must be welded (Most sizes available)

Pre-Welded coupler/adapters available from ididit:
1” 48x3/4” DD 1” DDx3/4” DD 3/4” 36x3/4” DD

                    
Adaptor
         
Coupler
                A:      
A: Steel Shafts:
2” - 36” Splined both ends
18” DD Shaft
36” DD Shaft
B: Stainless Steel:
4” - 36” Stainless Steel Shafts
Polished Shafts Available:
22” DD Shaft
36” DD Shaft		                    
        B:          
                   
Aluminum Shaft Support

Support bearings must be used when using more than 2 u-joints.

3/4” DD shafts will work in round support bearings.

Double u-joints would be counted as 2 u-joints.
 
                                 
Rod End Bearing
               
                                   
carshowpicturesbottombar