Add the convenience and reliability of a new column built specific for your Ford Truck. This steering column is not a universal column that requires modification of your original vehicle to install. Simply remove your old column, saving your original under dash mount as well as the original floor mount. Using one of our installation kits (see table below), install your new steering column in place of the old. Add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original.
Tilt and column shift columns are now available in steel, chrome, black powder coated and aluminum versions. The column will have a 3/4” 36 lower shaft. The female side of the plug found on our column is included. The wires will simply need to be matched by their function rather than their color. An under-dash mount is welded to the column to match the bolt pattern of the original. A new rag joint is required between the column and the gearbox.
Installation Kit Includes: No specific installation kit is assembled due to variations in installation. Please see below pieces that come with purchase of column and pieces that are popular to the installation of this column. (Installation Kits are sold separately) .
Wire adaptor is included with purchase of the Ford Half-Ton Truck Steering Columns.
3/4" 36x3/4" 36 Part number: 3000053434
A vibration reducer used between your steering column and gearbox. (Installations may vary) (Not included with purchase of column)
A popular installation for a Floor Mount is our Adjustable Floor Mount with Trim kit. (Not included with purchase of column)