Affix your adjustable under dash mount to the firewall and the dash

(Underdash Mount Part # 2301000010)
(a support may need to be built behind the dash)

Attach the column to the mount with two steering column drops. Holes have been provided to allow full adjustability of the position of the drops. The bigger the difference in length of drops, the greater the angle of the column.

Install Flange Bearing to support your steering shaft as well as seal the fire wall. (Part # MSD52130) Attach universal joint (s) and shafting from the column to the steering box. Most universal joints can bend up to 35 degrees. If you need more than 35 degrees but less than 70, a double u-joint is required. A support bearing is necessary for every u-joint over two within the system.

When using a column shift, mount the cable shift linkage to the base of the column. Route the cable through the kick panel to the transmission.

Enjoy the increased space for your knees, added clearance around your engine and full use of your column.

Install Flange Bearing to support your steering shaft as well as seal the fire wall. (Part # MSD52130)