- +1 (517) 424-0577
1976-77 Ford Bronco Tilt Floor Shift Ford Shaft Steering Column - Paintable Steel
This retrofit column is designed to fit your Bronco and does NOT require modification to your original vehicle to install. This Ford Style column features all Ford wiring and a Ford top shaft and will bolt to your stock box. Simply remove your old column, saving your original floor mount. For flawless installation, a pre-welded underdash mount comes standard with every column. Using an ididit installation kit, install your new steering column in place of the old. Add your stock Bronco wheel directly to the column and the gripping surface will be in the same location as the original.
INSTALLATION KITS (all the required components needed for flawless installation)
Includes 3/4"-36 Half Rag Joint
A new half rag joint is required for installation. The original rag joint was pressed onto the original column and cannot be removed.
Includes replacement rubber disk for Rag Joint
Before installing, carefully inspect the rubber on the other half of the original rag joint to be sure it is all intact. If it is not, you will need to use this replacement.
Includes 3/4"-36 x 3/4"-36 Rag Joint
- 1976 Ford Bronco
- 1977 Ford Bronco
- 3/4" 36
- 8-Position Tilt
- 2.25 in
- 2.25 in
- Year specific Ford Top Shaft
- Floor Shift
- Ford Style
- Manual and Auto
- Retrofit Columns - Tilt Floor Shift
- Tilt Floor Shift
- Item Requires Shipping
- 15.2 lbs.
- W8.0000” x H6.0000” x L44.0000”
Upgrade Your Igintion
Mon - Fri 8:30 - 5:30 PM EST
610 S. Maumee St.
Tecumseh, MI 49286