1958-1962 Corvette Retrofit Floor Shift Steering Column - Polished
Small cabin space calls for a small steering column made specifically for your Vette. Due to lack of space in front of the dash, the 1958-62 Corvette column is only available in straight floor shift. To install, simply remove your old column, saving your original under dash mount. You will be required to fabricate your own floor mount to safely secure the column to the firewall. The solid shaft that extends from inside the gearbox to the steering wheel will need to be cut and modified into the 3/4"DD shape in order to fit a coupler. Using an IDIDIT installation kit, install your new steering column in place of the old. Add an aftermarket wheel with the help of the IDIDIT 1956-62 Corvette Steering Wheel Adaptor.
For vehicles with an original factory harness, a 4-way flasher kit is included in your installation kit. This 4-way flasher kit will not only add safety to your vehicle, but will also convert your original wiring harness to the 3 7/8" plug found on your ididit column.Aftermarket Harness
Many aftermarket wiring companies offer replacement harnesses that incorporate a 4-way flasher unit as well as the flat 3 7/8" plug. If you are using one of these harnesses, a 4-way flasher kit is not necessary.
Deluxe Kit - Original Harness
Includes 3/4"-36 x 3/4"DD Coupler and Flasher Kit
Deluxe Kit - Aftermarket Harness
Includes 3/4"-36 x 3/4"DD Coupler
- Item Requires Shipping
- 10.9 lbs.
- W8.0000” x H6.0000” x L44.0000”