1970-75 Camaro Tilt Floor Shift Steering Column with id.CLASSIC Ignition - Paintable Paintable Steel
This retrofit column is designed to fit your Camaro and does NOT require modification to your original vehicle to install. ididit's 1970-75 Camaro column is fully collapsible and comes complete with id.CLASSIC ignition (in original GM location), a custom made floor mount, year specific wiring plugs, horn wire, and the provisions for mounting brackets. Simply remove your old column, saving your original under dash mount. Using an ididit installation kit, install your new steering column in place of the old. Add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original. You can also bolt your original 1970-75 Camaro wheel directly to this column. Standard features include 8-position tilt, ignition, self-canceling turn signals, 4-way flashers, horn wire, knobs & levers, collapsible, a 4 1/4" wiring plug, and a 1" 48 lower shaft.
If the original u-joint, shaft, or rag joint are missing, damaged, or worn one of the following installation kits will be required depending on the gearbox being used. If you are using an aftermarket steering box, please call ididit for further information.1970-75 3011008000
Manual Gearbox: 3/4"-36
Includes 1"-48 x 3/4"DD U-Joint, 3/4"-36 x 1"DD Rag Joint and a Collapsible Intermediate Shaft
Power Gearbox: 13/16"-36
Includes 1"-48 x 3/4"DD U-Joint, 1"DD x 13/16"-36 Rag Joint and a Collapsible Intermediate Shaft
- Item Requires Shipping