1953-56 GM Style Ford Half-Ton Truck Tilt Floor Shift Steering Column - Paintable Steel

SKU: 1120800010

Retrofit 1953-56 GM Style Ford Half-Ton Truck Tilt Floor Shift Steering Column - Paintable Steel

Limited Supply: only 4 remaining

Pricing: $611.00

Description
Special Notes
Installation Kits
Details
Shipping

Description

This GM based Ford Truck column is designed to fit your Ford Truck and features a GM upper shaft, along with a 3 7/8" Wiring Plug. Installs in the same location as the old column using a new swinger style column drop, floor mount and u-joint. Using an adaptor, add an aftermarket wheel and the gripping surface will be in the same location as the original.

Special Notes

Because the GM Style column uses the standard GM wiring harness, dimmer/wiper and cruise control options CAN be added to the column.

Please Note: A stock Ford steering wheel WILL NOT bolt to the ididit GM Style Ford column.

Installation Kits

INSTALLATION KITS (all the required components needed for flawless installation)

1953-56 Ford Half-Ton Truck
This GM style column comes complete with a turn signal plug and horn relay which will convert the ididit wiring to your Ford wiring. To install, a swinger-style column drop will be required to secure the column to the dash, as well as a floor mount and u-joint. Modification of the intermediate shaft is also required if you are using the original gearbox.

1965-79 Ford Half-Ton Truck
A new rag joint is required to install. This column comes complete with a pre-welded underdash mount that will match the original bolt pattern. A Female End Plug which connects with the ididit wiring plug is also included. The wires will simply be matched by function rather than color.
For 1965-66 columns: Please note that the Bendix box was frequently used as a replacement for the Saginaw box. If not using the original steering box, a shorter length column may be required. Call ididit for details.