1967-69 Chrylser B-Body Tilt Floor Shift Steering Column - Black Powder Coated
This retrofit column is designed to fit your Chrylser B-Body and does NOT require modification to your original vehicle to install. ididit's 1967-69 Chrysler B-Body tilt columns will bolt right in to your manual box, power box (with a rag joint) or rack & pinion system. These columns are fully collapsible and come complete with a model specific floor mount, wiring adaptor, and the provisions for mounting brackets. Simply remove your old column, saving your original under dash mount. For quick and easy installation, use an ididit installation kit and install your new steering column in place of the old. Using an adaptor, add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original.
INSTALLATION KITS (all the required components needed for flawless installation)
This column has an 3/4"DD extendable lower shaft that allows you to adjust the column length to fit your manual box, power box or rack & pinion system. If you are using an aftermarket steering box, please call ididit for further information.
- 1967 Chrysler Plymouth GTX
- 1967 Chrysler Plymouth Roadrunner
- 1968 Chrysler Plymouth GTX
- 1968 Chrysler Plymouth Roadrunner
- 1969 Chrysler Plymouth GTX
- 1969 Chrysler Plymouth Roadrunner
- Extendable 3/4" DD
- 8-Position Tilt
- GM 3 7/8"
- 2.25 in
- 2 in
- '69 to '94 GM Passenger Car
- Floor Shift
- Manual and Auto
- 40.5 Paintable Steel Black Powder Coated Dash
- Item Requires Shipping
- 18.0 lbs.
- W8.2500” x H5.7500” x L45.5000”